Performance tile

The Performance tile shows graph visualizations of Azure Monitor metrics data.

Graphs can be clicked on to drilldown to the resource dashboard, and from there the view in portal button allows you to link to the resource in the Azure portal.

How to configure a Performance tile

The following steps guide you through configuring all visualizations except the Report, since configuring a Performance Report works a little bit differently. If you want to configure a Report jump to How to configure a Performance tile Report.

Add a new tile to a dashboard or perspective and choose the Performance tile.
Select the visualization for your Performance tile and click next.
Uses the latest data to compare data, such as the top or bottom ranking metrics in descending or ascending order, as 'Top N'.
Visualizes both a number and the resulting bar width based on the number value.
Example:

Displays a metric value as a color shade.
Jump to Walkthrough: Adding a Line Graph to show % Processor Time..

Shows time-series data over time, in a graph with an x-axis (time) and a y-axis. You can show several objects, such as servers, in one graph.
Example:
Jump to Walkthrough: Adding a Line Graph to show % Processor Time..

Visualizes time-series data as vertical columns.
Example:

Shows data over time (like line graphs), but each item gets its own graph instead of showing all lines in one graph.
Example:

A Scalar displays one value. A Scalar is useful to show a specific number like "total cost of my services" or "free disk space on this server".
When a Data Stream returns multiple values (meaning a table with multiple rows), you will still be able to pick the Scalar visualization, but the Scalar will only show the value of the first row.
Example:

Jump to How to configure a Performance tile Report.
Allows you to compare metrics, such as two different metrics or metrics over different time periods. For example, compare Processor Time with Memory Available, or compare Percentage CPU with the same period last week.

Scope:

The scope section allows you to define what is shown.

Tip: If you experience any problems with scoping tiles, you'll find FAQs and help in the article How to scope tiles.

Note: By default, results are shown across all subscriptions (unless the subscription option is chosen to specify only one or more subscriptions).

Filter by tenant	By default results are shown across all tenants. In SquaredUp DS 4.7 and above a user who has access to multiple tenants will see a filter by tenant option. In a multi-tenant environment a user who does not have access to all tenants will see this message if they attempt to edit a scope containing tenants that they do not have access to. This may be because: One SquaredUp DS admin has added a tile scoped to tenants that other SquaredUp DS admins do not have permissions to. The customer/tenant is no longer serviced by this Customer Service Provider (CSP), so the tenant has been permanently removed for all SquaredUp DS admins. Symptoms A tile scope shows: "You do not have access to all of the tenants currently selected. Click here to reset which will remove those tenants from the scope." Tenants the user does not have access to show as: "Tenant ID could not be resolved" Procedure The message warns users that they do not have permissions to all the tenants in the scope. If the user chooses to reset and therefore edit the scope then the tenants that they do not have access to will be removed. If saved this scope will also have those tenants removed for users who do have access to them. It is not possible for the user to edit the scope without those tenants being removed from the scope. Where a tenant has been removed permanently you may wish to reset the scope to remove the unresolvable tenants.
List	List allows you to select several individual items to show. You can add multiple items. To remove an item click the x to the right of its name. Tip: Start typing and after two characters you'll see suggestions that match the name appear. Note: It depends on the tile what happens when you select more than one item. For example, when you select two virtual machines for a Status tile, you'll see the status of those VMs individually. When you select two virtual machines for a Cost Management tile, you'll see the cost for the two VMs added together.
Resource group	Select one or more resource groups. Filter by type: Tick filter by type to only show resources of a particular type within the chosen resource group.
Subscription	Select one or more subscriptions from the dropdown box if you wish to restrict results to only one or more subscriptions. When this is not used results are shown across all subscriptions. Filter by type: Tick filter by type to only show resources of a particular type within the chosen subscription.
Tags	Select items with a particular tag. Add the tag name and the tag value you want to use to search for. If you select multiple tags, the search automatically 'ANDs' the tags which means the scope only contains items which are tagged with all the tags listed. Filter by type: Tick filter by type to only show resources of a particular type within the chosen tag(s).
Type	Scope type can be used to show all resources of a particular type, for example all databases across all subscriptions, by typing `databases` and selecting `SQL databases`.
Show hidden types	This works in the same way as the Show hidden types option in the Azure portal. Hidden types include some ancillary resources which are created/managed by Azure infrastructure. It might be useful to display these resources when cleaning up your resource groups or subscriptions.

Note: If you never used a perspective, you should read Working with perspectives before scoping tiles on perspectives.

The power of perspectives is that tiles on a perspective can use a dynamic scope. A dynamic scope considers the currently viewed resource. A dynamic scope consists of two different states:

the configuration of the scope in the tile (for example, "consider child objects of type logical disk for the currently viewed object")
the actual resolved scope that depends on which resource you are currently viewing ("this object has 5 child objects of type logical disk")

After configuring the dynamic scope once in the tile, you'll get different results depending how the scope is resolved on the different resources you are viewing.

On perspectives, you can scope tiles to:

this resource (only on perspectives for resources)	The tile's scope will be the resolved to the resource that is currently viewed.
child resources (only on perspectives for resource groups and subscriptions)	When you select this option, the scope of the tile will be resolved to all resources that are in the group or subscription that is currently viewed. If you want to narrow the scope down to a specific type of resource in the group or subscription, you can filter for one specific type of resource.
other resources	Gives you the normal, non-dynamic scope options you are used to when scoping tiles on dashboards. This means the tile will not dynamically adapt it's content to the currently viewed resource, it will always show data for the static resource picked here. Since the power of perspectives is that their tiles can show data for different resources depending on what resource is currently being viewed, you should only select this option when you are sure that there is no relationship between the desired scope and the currently viewed resource.

Metric:
Here you define which value the graph will show. For example, if you want to see the response time of different servers, your metric value would be response time. If you want to see the number of tickets, your metric value would be number (of tickets).
The drop-down list will show you a list of all metrics available for the scope you have set. Press the down arrow on your keyboard in the choose metric field to see the list.
If no metrics are listed and the tile is showing the message Resources must all be of the same type go to the Scope panel and check that the resources are all of the same type, such as virtual machines. For example, if you have selected a resource group in the scope you should tick filter by type to ensure that only resources of one type are returned.
For more information about metrics available see Azure Monitor Metrics Overview and Supported metrics with Azure Monitor. SquaredUp DS does not support metric namespaces. For more information see Azure Monitor Metrics Data Structure.
After you've chosen a metric, you'll see more options:
Interval
Allows you to select the interval at which you would like to see data points. For example, data points a minute apart, 30 minutes apart, or a day apart.
Aggregation
Allows you to control how the data is aggregated when using intervals over 1 minute. For example, if using an interval of an hour would you like to the 60 data points collected in each hour to be aggregated together to show you one point for that hour that is the average figure, or the maximum figure.
Custom label:
Allows you to specify the metric label.
Dimension:
In Azure some metrics may have multiple dimensions. Dimensions of a metric are name-value pairs that carry additional data to describe the metric value. For more information see Azure Monitor Metrics Data Structure.
In SquaredUp DS version 4.5 and above you can choose to split and/or filter results using these dimensions. For more information see this Microsoft article Filtering and splitting.
Apply splitting:
Splitting by a dimension allows you to see a different line for the data for each different value that the chosen dimension has.
When you tick apply splitting you will see a list of all of the dimensions that the scope contains.
Select which dimensions you want to split by, and the data will separate by the different values that the dimension has.
Filter by dimension:
Filtering to a dimension's specific value allows you to see a line that only contains the data for the dimension value that is important to you.
For a metric that has dimensions go into the dimension panel and tick filter by dimension.
Click the add button and a drop down list will allow you to choose your dimension and type in the value of the dimension on the box. This will show you a line that only contains data for the chosen value.

Configure the settings for your visualization:

Which timeframe does this visualization use?

This visualization always uses the latest data and ignores the dynamic page timeframe set by users.

The page timeframe is the timeframe setting a dashboard or perspective is currently using. These timeframes are all relative to the current time, for example 7 days ago until now. When a user changes the page timeframe, all tiles that have use page timeframe set will adapt to the new timeframe. (Tiles that do not have use page timeframe set (i.e. are set to specific timeframe or custom timeframe) are not affected and won't change.)

Settings:

Data Range

The Data Range option allows you to choose the range of data the graph will display. For line graphs, this means the data on the y-axis.

percentage	Shows 0 to 100
fit to data	Shows the data minimum to data maximum
fit to data (from zero)	Shows from 0 to the data maximum
custom	Allows you to specify the min and max
custom fit	Allows you to specify the min and max limits, so that data outside your settings will not be shown. If all the data falls within your specified ranges then the y-axis range will fit to the data rather than your caps.

Sort

Sort allows you to change the order of the results displayed. You can sort by value (ascending or descending) or label (alphabetically ascending or descending).

Limit number of results:

This option is only available when you sort by values, not by labels.

Here you can define a limit for the number of results you want to see. Activate the limit number of results displayed checkbox to enter a limit for results. You can choose if this limit should be applied from the top ranking results down (ascending, default option) or from the bottom ranking results up (descending).

Value

Value formatter

Allows you to format the value by using the mustache picker. For example, you can round the value up or down or convert it.

Label

Allows you to change the label of the results.

auto

Choose this option if you want to use the default label that has been created automatically.

custom

Here you can change the label to a custom label. You can use static text and dynamic properties. Use the mustache picker

to select dynamic properties from the response data to use them as labels.

For more information see How to use Custom Labels

Property names that contain hyphens (for example properties.name-with-hyphens) can't be processed due to a JavaScript limitation. If you want to use a property that contains a hyphen, you have two options:

If you have access to the data source and can change the name of the property, change the name of the property to a name without hyphens.
For example, if your Elasticsearch query uses a property (an aggregation, a grouping or any other property you want to use) with a name that contains a hyphen, you can either access your Elasticsearch instance and change the name there or you can overwrite the name in the query dsl field.
If you can't change the name of the property, you need to enter the property name in the following format:
Original property name:
{{properties.name-with-hyphens.value}}
New format:
{{properties['name-with-hyphens'].value}}

Color

multiple colors

Here you can enable or disable graph color matching.

How to enable graph color matching

If you turn color matching on, one item (a specific resource, object, site, anything you are displaying in your graphs) is shown in the same color in different graphs on one dashboard or one perspective. You can use either color matching or custom colors (colors based on values), they cannot both be used at the same time.

custom colors

Setting colors based on values

You can display the data in different colors based on values you define here. For example, you can display the data in green when the value is below 100 and in red when it is above 100.

Click on add to configure a condition.
Click on select color.... to open the color picker. Select the color for this condition.
Enter your condition in the field next to the color. You can use the value property and manipulate it with JavaScript String and Regex APIs. When you click on the mustache picker, you'll get some examples:
- Value is greater than something, less than something, etc.
  For example: {{value < 10}} (The color you pick will be used if the value is less than 10)
- Value is present in the result (scalar tiles only)
  For example: value.IndexOf('error') != -1 (The color you pick will be used if the string value "error" is present in the results)
- Value matches one of the regular expressions you defined (scalar tiles only)
  For example: value.match(/healthy|good|up/) (The color you picked will be used if the string values are healthy, good, or up)

You are able to combine value matching with label matching.

Setting colors based on labels

You can display the data in different colors based on labels. For example, you can display data in green for a specific user.

Click on select color.... to open the color picker. Select the color for this condition.
Enter your condition in the field next to the color. You can use the label property and manipulate it with JavaScript String and Regex APIs. When you click on the mustache picker, you'll get some examples:
- Condition is true if the label contains something
  For example: {{label.indexOf('SQL') != -1}} (The color you pick will be used if the label contains 'SQL')
- Condition is true if the label contains multiple things
  For example: {{label.match(/C:|D:|E:/) != null}} (The color you pick will be used if the label contains 'C:', 'D:' or 'E:')
- Condition is true if the label contains multiple things with multiple variations
  For example: {{label.match(/^[Ss]erver[0-9]+$/) != null}} (The color you pick will be used if the label is 'Server' or 'server' with a number after it)

You are able to combine label matching with value matching.

Which timeframe does this visualization use?

This visualization always uses the latest data and ignores the dynamic page timeframe set by users.

Settings:

Display

Here you can change the width and height of the individual blocks of the graph. Use the sliders for width and height to change the settings.

Fixed width:
All blocks have the same width and height according to your settings.

Property based width:
The blocks' size depends on the property you chose. The more of property x an object has (for example, the number of processors), the bigger the block will be displayed proportionally to the other blocks. You can still define the overall width and height with the sliders.

Color

Here you can choose the color scheme for your heatmap. Higher values are shown in a lighter shade of the color, and lower values in darker shades.

Data Range

The Data Range option allows you to choose the range of data the graph will display. For line graphs, this means the data on the y-axis.

percentage	Shows 0 to 100
fit to data	Shows the data minimum to data maximum
fit to data (from zero)	Shows from 0 to the data maximum
custom	Allows you to specify the min and max
custom fit	Allows you to specify the min and max limits, so that data outside your settings will not be shown. If all the data falls within your specified ranges then the y-axis range will fit to the data rather than your caps.

Label

auto	Choose this option if you want to use the default label that has been created automatically.
value	Your chosen metric is used as a label
none	No label
custom	Here you can change the label to a custom label. You can use static text and dynamic properties. Use the mustache picker to select dynamic properties from the response data to use them as labels. For more information see How to use Custom Labels Property names that contain hyphens (for example `properties.name-with-hyphens`) can't be processed due to a JavaScript limitation. If you want to use a property that contains a hyphen, you have two options: If you have access to the data source and can change the name of the property, change the name of the property to a name without hyphens. For example, if your Elasticsearch query uses a property (an aggregation, a grouping or any other property you want to use) with a name that contains a hyphen, you can either access your Elasticsearch instance and change the name there or you can overwrite the name in the query dsl field. If you can't change the name of the property, you need to enter the property name in the following format: Original property name: `{{properties.name-with-hyphens.value}}` New format: `{{properties['name-with-hyphens'].value}}`

Timeframe

The timeframe section allows you to determine the timeframe for the data. You can choose either to use:

Use page timeframe

Specific timeframe

These timeframes allow you to set a fixed timeframe such as last 1 hour or last 7 days. You can use the

sample relative timeframes button to get some examples for different timeframes. These timeframes are all relative to the current time, for example 7 days ago until now. Using this setting means that any change the user makes to the page timeframe is ignored.

Custom timeframe

This allows you to set a fixed timeframe window from the time and calendar picker. This sets a completely customizable timeframe window, not relative to now.

Top N

Threshold

You can choose to apply a threshold line at a specified value, and whether you wish to fill above or below this value, or just show the line. For example, for free disk space you might want to fill below the line to highlight when space goes below a particular threshold. For processor information you might want to fill above the line to highlight when processor percentage goes above that threshold. The threshold is also shown on the drilldown view.

Max, min, avg

When drilled-down to view a graph, you can select the min, max and avgoptions for each object (displayed to the right of the graph), which displays a line cutting horizontally across the graph a each of the selected value points.

Data range

The Data Range option allows you to choose the range of data the graph will display. For line graphs, this means the data on the y-axis.

percentage	Shows 0 to 100
fit to data	Shows the data minimum to data maximum
fit to data (from zero)	Shows from 0 to the data maximum
custom	Allows you to specify the min and max
custom fit	Allows you to specify the min and max limits, so that data outside your settings will not be shown. If all the data falls within your specified ranges then the y-axis range will fit to the data rather than your caps.

Display

Height:

Allows you to set the height of the tile with a slider.

Show hover details:

Shows the value for all lines at any point you hover. There may not be a value exactly where you hover so the value is interpolated from the values either side.

Show points:

Shows where the data points are on the line. Useful to identify missing points, or detail for changing data.

Show trend

Enable the Show Trend Linestoggle to display a trend line for the line graph data. Disable the toggle to hide the trend line.

Custom colors:

You can display the data in different colors based on labels. For example, you can display data in green for a specific user.

Click on select color.... to open the color picker. Select the color for this condition.
Enter your condition in the field next to the color. You can use the label property and manipulate it with JavaScript String and Regex APIs. When you click on the mustache picker, you'll get some examples:
- Condition is true if the label contains something
  For example: {{label.indexOf('SQL') != -1}} (The color you pick will be used if the label contains 'SQL')
- Condition is true if the label contains multiple things
  For example: {{label.match(/C:|D:|E:/) != null}} (The color you pick will be used if the label contains 'C:', 'D:' or 'E:')
- Condition is true if the label contains multiple things with multiple variations
  For example: {{label.match(/^[Ss]erver[0-9]+$/) != null}} (The color you pick will be used if the label is 'Server' or 'server' with a number after it)

Label

Allows you to change the label of the results.

Show legend:

Allows you to show or hide the legend of the graph.

Label:

auto

Choose this option if you want to use the default label that has been created automatically.

custom

Here you can change the label to a custom label. You can use static text and dynamic properties. Use the mustache picker

to select dynamic properties from the response data to use them as labels.

For more information see How to use Custom Labels

If you have access to the data source and can change the name of the property, change the name of the property to a name without hyphens.
For example, if your Elasticsearch query uses a property (an aggregation, a grouping or any other property you want to use) with a name that contains a hyphen, you can either access your Elasticsearch instance and change the name there or you can overwrite the name in the query dsl field.
If you can't change the name of the property, you need to enter the property name in the following format:
Original property name:
{{properties.name-with-hyphens.value}}
New format:
{{properties['name-with-hyphens'].value}}

Timeframe

The timeframe section allows you to determine the timeframe for the data. You can choose either to use:

Use page timeframe

Specific timeframe

These timeframes allow you to set a fixed timeframe such as last 1 hour or last 7 days. You can use the

Custom timeframe

This allows you to set a fixed timeframe window from the time and calendar picker. This sets a completely customizable timeframe window, not relative to now.

Threshold

Data range

The Data Range option allows you to choose the range of data the graph will display. For line graphs, this means the data on the y-axis.

percentage	Shows 0 to 100
fit to data	Shows the data minimum to data maximum
fit to data (from zero)	Shows from 0 to the data maximum
custom	Allows you to specify the min and max
custom fit	Allows you to specify the min and max limits, so that data outside your settings will not be shown. If all the data falls within your specified ranges then the y-axis range will fit to the data rather than your caps.

Display

Height:

Allows you to set the height of the tile with a slider.

Show hover details:

Shows the value for all lines at any point you hover. There may not be a value exactly where you hover so the value is interpolated from the values either side.

Solid bars:

Show the bars as solid color or translucent.

Custom colors:

You can display the data in different colors based on labels. For example, you can display data in green for a specific user.

Click on select color.... to open the color picker. Select the color for this condition.
Enter your condition in the field next to the color. You can use the label property and manipulate it with JavaScript String and Regex APIs. When you click on the mustache picker, you'll get some examples:
- Condition is true if the label contains something
  For example: {{label.indexOf('SQL') != -1}} (The color you pick will be used if the label contains 'SQL')
- Condition is true if the label contains multiple things
  For example: {{label.match(/C:|D:|E:/) != null}} (The color you pick will be used if the label contains 'C:', 'D:' or 'E:')
- Condition is true if the label contains multiple things with multiple variations
  For example: {{label.match(/^[Ss]erver[0-9]+$/) != null}} (The color you pick will be used if the label is 'Server' or 'server' with a number after it)

Label

Allows you to change the label of the results.

Show legend:

Allows you to show or hide the legend of the graph.

Label:

auto

Choose this option if you want to use the default label that has been created automatically.

custom

Here you can change the label to a custom label. You can use static text and dynamic properties. Use the mustache picker

to select dynamic properties from the response data to use them as labels.

For more information see How to use Custom Labels

If you have access to the data source and can change the name of the property, change the name of the property to a name without hyphens.
For example, if your Elasticsearch query uses a property (an aggregation, a grouping or any other property you want to use) with a name that contains a hyphen, you can either access your Elasticsearch instance and change the name there or you can overwrite the name in the query dsl field.
If you can't change the name of the property, you need to enter the property name in the following format:
Original property name:
{{properties.name-with-hyphens.value}}
New format:
{{properties['name-with-hyphens'].value}}

Timeframe

The timeframe section allows you to determine the timeframe for the data. You can choose either to use:

Use page timeframe

Specific timeframe

These timeframes allow you to set a fixed timeframe such as last 1 hour or last 7 days. You can use the

Custom timeframe

This allows you to set a fixed timeframe window from the time and calendar picker. This sets a completely customizable timeframe window, not relative to now.

Data Range

The Data Range option allows you to choose the range of data the graph will display. For line graphs, this means the data on the y-axis.

percentage	Shows 0 to 100
fit to data	Shows the data minimum to data maximum
fit to data (from zero)	Shows from 0 to the data maximum
custom	Allows you to specify the min and max
custom fit	Allows you to specify the min and max limits, so that data outside your settings will not be shown. If all the data falls within your specified ranges then the y-axis range will fit to the data rather than your caps.

Sort

Sort allows you to change the order of the results displayed. You can sort by value (ascending or descending) or label (alphabetically ascending or descending).

Label

Allows you to change the label of the results.

auto

Choose this option if you want to use the default label that has been created automatically.

custom

Here you can change the label to a custom label. You can use static text and dynamic properties. Use the mustache picker

to select dynamic properties from the response data to use them as labels.

For more information see How to use Custom Labels

If you have access to the data source and can change the name of the property, change the name of the property to a name without hyphens.
For example, if your Elasticsearch query uses a property (an aggregation, a grouping or any other property you want to use) with a name that contains a hyphen, you can either access your Elasticsearch instance and change the name there or you can overwrite the name in the query dsl field.
If you can't change the name of the property, you need to enter the property name in the following format:
Original property name:
{{properties.name-with-hyphens.value}}
New format:
{{properties['name-with-hyphens'].value}}

Color

multiple colors

Here you can enable or disable graph color matching.

How to enable graph color matching

custom colors

Setting colors based on values

You can display the data in different colors based on values you define here. For example, you can display the data in green when the value is below 100 and in red when it is above 100.

Click on add to configure a condition.
Click on select color.... to open the color picker. Select the color for this condition.
Enter your condition in the field next to the color. You can use the value property and manipulate it with JavaScript String and Regex APIs. When you click on the mustache picker, you'll get some examples:
- Value is greater than something, less than something, etc.
  For example: {{value < 10}} (The color you pick will be used if the value is less than 10)
- Value is present in the result (scalar tiles only)
  For example: value.IndexOf('error') != -1 (The color you pick will be used if the string value "error" is present in the results)
- Value matches one of the regular expressions you defined (scalar tiles only)
  For example: value.match(/healthy|good|up/) (The color you picked will be used if the string values are healthy, good, or up)

You are able to combine value matching with label matching.

Setting colors based on labels

You can display the data in different colors based on labels. For example, you can display data in green for a specific user.

Click on select color.... to open the color picker. Select the color for this condition.
Enter your condition in the field next to the color. You can use the label property and manipulate it with JavaScript String and Regex APIs. When you click on the mustache picker, you'll get some examples:
- Condition is true if the label contains something
  For example: {{label.indexOf('SQL') != -1}} (The color you pick will be used if the label contains 'SQL')
- Condition is true if the label contains multiple things
  For example: {{label.match(/C:|D:|E:/) != null}} (The color you pick will be used if the label contains 'C:', 'D:' or 'E:')
- Condition is true if the label contains multiple things with multiple variations
  For example: {{label.match(/^[Ss]erver[0-9]+$/) != null}} (The color you pick will be used if the label is 'Server' or 'server' with a number after it)

You are able to combine label matching with value matching.

Which timeframe does this visualization use?

This visualization always uses the latest data and ignores the dynamic page timeframe set by users.

Settings:

Scalar

Font size	Allows you to set the font size of the value in the tile.
Alignment	Select the scalar text alignment. Choose from left, center or right.
Unit	Allows you to add a unit to the value displayed in the Scalar tile. For example, if your value shows a time in milliseconds, you can enter "ms" or if your value shows pageviews, you can enter "pageviews".
Value formatter	Allows you to format the value by using the mustache picker. For example, you can round the value up or down or convert it.

Color

Conditional formatting:

You can display the data in different colors based on values you define here. For example, you can display the data in green when the value is below 100 and in red when it is above 100.

Click on add to configure a condition.
Click on select color.... to open the color picker. Select the color for this condition.
Enter your condition in the field next to the color. You can use the value property and manipulate it with JavaScript String and Regex APIs. When you click on the mustache picker, you'll get some examples:
- Value is greater than something, less than something, etc.
  For example: {{value < 10}} (The color you pick will be used if the value is less than 10)
- Value is present in the result (scalar tiles only)
  For example: value.IndexOf('error') != -1 (The color you pick will be used if the string value "error" is present in the results)
- Value matches one of the regular expressions you defined (scalar tiles only)
  For example: value.match(/healthy|good|up/) (The color you picked will be used if the string values are healthy, good, or up)

Display:

Here you decide how the color is used:

Tile background	Highlight the tile in the color you defined.
Text foreground	Display the text in the color you defined.

Link options

Allows you to turn the graph item(s) into links. You can either enter plain text to create a fixed link (URL always stays the same) or use dynamic properties to create a dynamic link.

Dynamic links make use of dynamic properties which are inserted as part of the URL. This creates a template URL that will be resolved to an actual URL based on the items properties.

For example, if you want to link to tickets in your ticket system and the format of the URL for tickets in your system is https://www.my-system/ticket-123, where 123 is the ticket ID, you can use the dynamic property that contains the ticket ID and enter the dynamic URL https://www.my-system/ticket-{{ticketID}}.

For scalars, you can only use the dynamic property value in dynamic links, which means the link changes when the value of the scalar changes. Since a scalar is just one item, it would also make sense to use a fixed link, for example the link to the website of which you are displaying the response time.
For status icon or bars and the rows of a grid, you usually want to use a dynamic link since you get multiple items or rows that represent different things. You can use any of the dynamic properties the mustache picker offers you.

Dynamic mustache properties and values you need to change according to your instance are highlighted in bold.

ServiceNow incidents:
https://<your-instance>.service-now.com/nav_to.do?uri=%2Fincident.do%3Fsys_id%3D{{sys_id}}

PagerDuty incidents:
{{incident.html_url}}

Azure DevOps projects:
https://dev.azure.com/<your-instance>/{{name}}

Azure DevOps builds:
https://dev.azure.com/<your-instance>/_build/results?buildId={{id}}

Zendesk tickets:
https://<your-instance>.zendesk.com/agent/tickets/{{id}}

Azure Application Insights
https://portal.azure.com/#@squaredup.net/resource/{{ResourceId}}

Click done to save the tile.
The tile now shows data according to your settings.

How to configure a Performance tile Report

Add a new tile to a dashboard or perspective and choose the Performance tile.
Choose the Report visualization.
Allows you to compare metrics, such as two different metrics or metrics over different time periods. For example, compare Processor Time with Memory Available, or compare Percentage CPU with the same period last week.
For a step by step guide to using this tile jump to Walkthrough: Adding a Report to compare different metrics and/or time periods..

Report editor:
Click on Configure report to switch to the report editor.
In the report editor, you can compare different metrics and time periods with each other:
Examples:

Timeframe (at the top of the editor)

There is only one timeframe for the report and it can be controlled from two different places, in the timeframe panel in the tile and in the report editor. If you change the timeframe in the panel, the timeframe in the report editor changes. If you change the timeframe in the report editor, the timeframe changes in the panel.

The timeframe section allows you to determine the timeframe for the data. You can choose either to use:

Use page timeframe

Specific timeframe

These timeframes allow you to set a fixed timeframe such as last 1 hour or last 7 days. You can use the

Custom timeframe

This allows you to set a fixed timeframe window from the time and calendar picker. This sets a completely customizable timeframe window, not relative to now.

SquaredUp DS automatically uses the highest resolution data available for the time period.

If your report uses the page timeframe, some page timeframe settings might make it impossible to show a time comparison. The page timeframe must be set to a shorter range than the time comparison.
Example: Your report uses the page timeframe and your time comparison is set to last week (which means 7 days ago from today). When a user changes the page timeframe to last 30 days (which means 30 days ago from today), the time range of the report data is longer than the time comparison.

How to identify this issue:
When the comparison line cannot be shown a yellow exclamation mark will be shown at the top right of the tile with a message similar to Timeframe from 5/25/2019 10:26:00 AM to 6/24/2019 10:26:00 AM cannot be shifted by the range 'Last7Days' because it is longer than the range.

How to fix this issue:
If you set your report to a specific timeframe, this issue will not occur since the page timeframe will be ignored.

Scope

The scope section allows you to define what is shown.

Tip: If you experience any problems with scoping tiles, you'll find FAQs and help in the article How to scope tiles.

Note: By default, results are shown across all subscriptions (unless the subscription option is chosen to specify only one or more subscriptions).

Filter by tenant	By default results are shown across all tenants. In SquaredUp DS 4.7 and above a user who has access to multiple tenants will see a filter by tenant option. In a multi-tenant environment a user who does not have access to all tenants will see this message if they attempt to edit a scope containing tenants that they do not have access to. This may be because: One SquaredUp DS admin has added a tile scoped to tenants that other SquaredUp DS admins do not have permissions to. The customer/tenant is no longer serviced by this Customer Service Provider (CSP), so the tenant has been permanently removed for all SquaredUp DS admins. Symptoms A tile scope shows: "You do not have access to all of the tenants currently selected. Click here to reset which will remove those tenants from the scope." Tenants the user does not have access to show as: "Tenant ID could not be resolved" Procedure The message warns users that they do not have permissions to all the tenants in the scope. If the user chooses to reset and therefore edit the scope then the tenants that they do not have access to will be removed. If saved this scope will also have those tenants removed for users who do have access to them. It is not possible for the user to edit the scope without those tenants being removed from the scope. Where a tenant has been removed permanently you may wish to reset the scope to remove the unresolvable tenants.
List	List allows you to select several individual items to show. You can add multiple items. To remove an item click the x to the right of its name. Tip: Start typing and after two characters you'll see suggestions that match the name appear. Note: It depends on the tile what happens when you select more than one item. For example, when you select two virtual machines for a Status tile, you'll see the status of those VMs individually. When you select two virtual machines for a Cost Management tile, you'll see the cost for the two VMs added together.
Resource group	Select one or more resource groups. Filter by type: Tick filter by type to only show resources of a particular type within the chosen resource group.
Subscription	Select one or more subscriptions from the dropdown box if you wish to restrict results to only one or more subscriptions. When this is not used results are shown across all subscriptions. Filter by type: Tick filter by type to only show resources of a particular type within the chosen subscription.
Tags	Select items with a particular tag. Add the tag name and the tag value you want to use to search for. If you select multiple tags, the search automatically 'ANDs' the tags which means the scope only contains items which are tagged with all the tags listed. Filter by type: Tick filter by type to only show resources of a particular type within the chosen tag(s).
Type	Scope type can be used to show all resources of a particular type, for example all databases across all subscriptions, by typing `databases` and selecting `SQL databases`.
Show hidden types	This works in the same way as the Show hidden types option in the Azure portal. Hidden types include some ancillary resources which are created/managed by Azure infrastructure. It might be useful to display these resources when cleaning up your resource groups or subscriptions.

Note: If you never used a perspective, you should read Working with perspectives before scoping tiles on perspectives.

The power of perspectives is that tiles on a perspective can use a dynamic scope. A dynamic scope considers the currently viewed resource. A dynamic scope consists of two different states:

the configuration of the scope in the tile (for example, "consider child objects of type logical disk for the currently viewed object")
the actual resolved scope that depends on which resource you are currently viewing ("this object has 5 child objects of type logical disk")

After configuring the dynamic scope once in the tile, you'll get different results depending how the scope is resolved on the different resources you are viewing.

On perspectives, you can scope tiles to:

this resource (only on perspectives for resources)	The tile's scope will be the resolved to the resource that is currently viewed.
child resources (only on perspectives for resource groups and subscriptions)	When you select this option, the scope of the tile will be resolved to all resources that are in the group or subscription that is currently viewed. If you want to narrow the scope down to a specific type of resource in the group or subscription, you can filter for one specific type of resource.
other resources	Gives you the normal, non-dynamic scope options you are used to when scoping tiles on dashboards. This means the tile will not dynamically adapt it's content to the currently viewed resource, it will always show data for the static resource picked here. Since the power of perspectives is that their tiles can show data for different resources depending on what resource is currently being viewed, you should only select this option when you are sure that there is no relationship between the desired scope and the currently viewed resource.

Metric

Here you define which value the graph will show. For example, if you want to see the response time of different servers, your metric value would be response time. If you want to see the number of tickets, your metric value would be number (of tickets).

The drop-down list will show you a list of all metrics available for the scope you have set. Press the down arrow on your keyboard in the choose metric field to see the list.

If no metrics are listed and the tile is showing the message Resources must all be of the same type go to the Scope panel and check that the resources are all of the same type, such as virtual machines. For example, if you have selected a resource group in the scope you should tick filter by type to ensure that only resources of one type are returned.

For more information about metrics available see Azure Monitor Metrics Overview and Supported metrics with Azure Monitor. SquaredUp DS does not support metric namespaces. For more information see Azure Monitor Metrics Data Structure.

After you've chosen a metric, you'll see more options:

Interval
Allows you to select the interval at which you would like to see data points. For example, data points a minute apart, 30 minutes apart, or a day apart.

Aggregation
Allows you to control how the data is aggregated when using intervals over 1 minute. For example, if using an interval of an hour would you like to the 60 data points collected in each hour to be aggregated together to show you one point for that hour that is the average figure, or the maximum figure.

Custom label:
Allows you to specify the metric label.

Top N

Time comparison
Creates a new line in the graph that shows the same data, but how it looked like in the past. The line will be a dashed line to be easily identifiable as a time comparison. If the line refers to the same object, the lines will be the same color, with the time comparison line in a lighter shade.

You can choose different points in the past between yesterday and 12 months ago. If you don't want a time comparison line in your graph, leave the setting to none (default).

Y-axis
Here you can decide if the values (y-axis) and labels for this layer will be shown on the left or right side of the graph.
If you want to compare two different metrics, it makes sense to put one layer's metrics on the left side and the other layer's metrics on the right side.

Label

auto

Choose this option if you want to use the default label that has been created automatically.

custom

Here you can change the label to a custom label. You can use static text and dynamic properties. Use the mustache picker

to select dynamic properties from the response data to use them as labels.

For more information see How to use Custom Labels

If you have access to the data source and can change the name of the property, change the name of the property to a name without hyphens.
For example, if your Elasticsearch query uses a property (an aggregation, a grouping or any other property you want to use) with a name that contains a hyphen, you can either access your Elasticsearch instance and change the name there or you can overwrite the name in the query dsl field.
If you can't change the name of the property, you need to enter the property name in the following format:
Original property name:
{{properties.name-with-hyphens.value}}
New format:
{{properties['name-with-hyphens'].value}}

A Layer contains the object and the metric. By adding new layers, you add new metrics and compare them with each other.
Time comparisons compares different time periods of the same metric in the same layer.
If you want to compare how one metric looks compared to the same metric six months ago, you only need one layer with a time comparison.
If you want to compare the CPU usage to the memory usage of one computer, you need two layers with different metrics.

Click back to dashboard in the upper left corner to get back from the report editor to your dashboard.
If you want to define further settings for your report, you need to switch the dashboard to edit mode and edit the tile.
Timeframe:
There is only one timeframe for the report and it can be controlled from two different places, in the timeframe panel in the tile and in the report editor. If you change the timeframe in the panel, the timeframe in the report editor changes. If you change the timeframe in the report editor, the timeframe changes in the panel.

The timeframe section allows you to determine the timeframe for the data. You can choose either to use:
Use page timeframe
The page timeframe is the timeframe setting a dashboard or perspective is currently using. These timeframes are all relative to the current time, for example 7 days ago until now. When a user changes the page timeframe, all tiles that have use page timeframe set will adapt to the new timeframe. (Tiles that do not have use page timeframe set (i.e. are set to specific timeframe or custom timeframe) are not affected and won't change.)
Specific timeframe
These timeframes allow you to set a fixed timeframe such as last 1 hour or last 7 days. You can use the
sample relative timeframes button to get some examples for different timeframes. These timeframes are all relative to the current time, for example 7 days ago until now. Using this setting means that any change the user makes to the page timeframe is ignored.
Custom timeframe
This allows you to set a fixed timeframe window from the time and calendar picker. This sets a completely customizable timeframe window, not relative to now.

If your report uses the page timeframe, some page timeframe settings might make it impossible to show a time comparison. The page timeframe must be set to a shorter range than the time comparison.
Example: Your report uses the page timeframe and your time comparison is set to last week (which means 7 days ago from today). When a user changes the page timeframe to last 30 days (which means 30 days ago from today), the time range of the report data is longer than the time comparison.
How to identify this issue:
When the comparison line cannot be shown a yellow exclamation mark will be shown at the top right of the tile with a message similar to Timeframe from 5/25/2019 10:26:00 AM to 6/24/2019 10:26:00 AM cannot be shifted by the range 'Last7Days' because it is longer than the range.
How to fix this issue:
If you set your report to a specific timeframe, this issue will not occur since the page timeframe will be ignored.

Data range:

The Data Range option allows you to choose the range of data the graph will display. For line graphs, this means the data on the y-axis.

percentage	Shows 0 to 100
fit to data	Shows the data minimum to data maximum
fit to data (from zero)	Shows from 0 to the data maximum
custom	Allows you to specify the min and max
custom fit	Allows you to specify the min and max limits, so that data outside your settings will not be shown. If all the data falls within your specified ranges then the y-axis range will fit to the data rather than your caps.

Height:
Height:
Allows you to set the height of the tile with a slider.
Legend:
Allows you to show or hide the legend of the graph.
Click done to save the tile.
The tile now shows data according to your settings.

How to enable graph color matching

Graph color matching means that one item (a specific resource, object, site, anything you are displaying in your graphs) is shown in the same color in different graphs on one dashboard or one perspective.

Line Graphs, Sparklines, Bar Graphs and Reports (available in Performance tiles) support graph color matching.

Color matching only works when the item uses the exact same label in all graphs.

For SquaredUp DS v4.8 and above:
Graph lines on a dashboard will show the same color when the object labels match, even if those graphs show different metrics.

For SquaredUp DS v4.7 and below:
Graph lines will only show the same color for the same object when displaying the same metric.

How to use graph color matching

Graph color matching must be enabled for the dashboard or the perspective. The default setting for all dashboards and perspectives is color matching enabled.
The default setting for graph color matching is on. Here's how you can check or change this setting:
1. On a dashboard or perspective click the edit button
2. Click the settings button.
3. The match by label button is under Graph colors.
  If you want to disable color matching, toggle the match by label button to OFF.
  If you want to enable color matching, toggle the match by label button to ON.
The label for the item must be the same in all graphs that you want to display the same color.
1. In the label panel of your graph, set the label to custom label.
2. If you are using a mustache property, make sure that you use the same property in all graphs you want to color match.
  If you are using a manipulated mustache label (for example, custom text between labels like Name: {{properties.name}} ), make sure to use the exact same label in all graphs you want to color match.
  If you are using custom text, make sure to use the exact same custom text including upper and lower cases.
3. For resources that show the same label the colors will now match:
For Sparklines and Bar Graphs (called Bar Top N in Performance tiles), you need to switch on multiple colors to enable color matching. Multiple colors is switched off by default, you need to switch it on for each Sparkline and Bar Graph.
1. Go to the color panel of the Sparkline or Bar Graph.
2. Toggle multiple colors to on.
  The Sparkline or Bar Graph will now color match, as long as the dashboard setting match by label is on and the labels do match.

Walkthroughs

Walkthrough: Adding a Line Graph to show % Processor Time.

In SquaredUp DS navigate to where you'd like the dashboard to be created. Hover over the + button and click dashboard.
Give the dashboard a title, by replacing the text that says New Dashboard.
The dashboard is saved as you go along so there's no need to save your changes. You can find your dashboard by clicking on the right-hand menu ☰ > system > unpublished.
A new tile has already been added to the dashboard. Edit the title by overwriting the placeholder value New tile with your own title.
The tile selector will already be open. Click Performance. The Performance tile button (along with several other tiles) displays a little plus up the top right. This indicates that there are more tiles available from this one button.
Click on the Line Graph button to create a line graph.
Next we need to scope the tile. In the scope section select type then start typing Virtual machines and then click on virtual machines from the results.
Correctly scoping the tile is very important. For more information seeHow to scope tiles
Click next.
In the metric box type cpu and then select Percentage CPU from the results.
A line graph for the processor usage should now appear. You could stop here, but we'll continue to configure the tile.
Change the interval to 15 minutes.
Change the aggregation to maximum.
Skip the dimension section, as this metric does not have any dimensions.
Leave the Timeframe set to use page timeframe so the time period for this tile changes when users change the page timeframe.
Click next.
In the top n section limit the number of results displayed to 3, and tick descending to show those with the highest processor utilization.
Leave data range as it is.
Leave the display as it is.
In the label tick show legend
Click done.

Walkthrough: Adding a Heatmap to show % Processor time and Logical Processors.

Click the orange + plus button to add a new tile to the dashboard.
Click Performance, and then the Heatmap button.
Next we need to scope the tile. In the scope section select type then start typing Virtual machines and then click on virtual machines from the results.
Correctly scoping the tile is very important. For more information see How to scope tiles
In the metric box type cpu and then select Percentage CPU from the results.
A heatmap should appear after a moment.
Once you've chosen a metric give the tile a title which explains what the tile shows.
Skip the dimension section, as this metric does not have any dimensions.
In the display section adjust the width and height sliders to change the heatmap sizes.
By default objects with no data are hidden, you can choose to show them by ticking the box show objects with no data.
The color section allows you to change the heatmap color.
Leave the data range section as it is for now. This allows you to change the range of values shown.
Leave the label section as it is. For more information on changing the label see How to use Custom Labels.
Click done.

Walkthrough: Adding a Report to compare different metrics and/or time periods.

This walkthrough shows you how to add metrics as layers to the Report tile, and also how to compare them with historical data.

Click on the Report button to create a Report.
Give the tile a title.
The Report tile uses layers to allow you to add multiple metrics to one graph for comparison. This could get difficult to view in a narrow column, so this tile allows you to edit the tile full screen in a report editor). Click configure report to open the report editor and add layers.
The report editor has opened full screen, but you can return to your dashboard at any time by clicking the back to dashboard button at the top right. The layer configuration appears on the left side of the screen, and a preview of the graph will show on the right as your proceed.
The first layer is expanded ready for you to edit. Give the layer a title, such as the metric you intend to add.
For this walkthrough we are going to compare two metrics for one machine. In the scope section click list then type the name of a machine, and then click on that machine in the results.
In the metric > quick find box type the name of the first metric you want to add.
For this walkthrough type CPU and then select the metric Percentage CPU.
The right side of the screen will show a preview of the graph. You could stop here, but we'll continue to configure the tile.
Click done.
Click the orange plus button to add a second layer for your next metric.
Give this layer the title of the metric you are adding.
Click list then type the name of machine you used for the first layer, and then click on that machine in the results.
In the metric > quick find box type the name of the first metric you want to add.
For this walkthrough type disk and then select the metric Disk Read Bytes.
Skip the dimension section, as this metric does not have any dimensions.
Leave the top n section as it is for this walkthrough.
You might like to add a line to allow you to compare this data with historical data. Adding the time comparison is optional.
In the time comparison section click one of the time periods to compare with this data, for example click yesterday.
To add a time comparison for the existing layer, hover over the existing layer and then click the compare layer button to jump straight into the time comparison section and then click yesterday.
In the y-axis section click on right to get the Disk read bytes graph to use the right-hand y-axis.
This is useful because the two metrics use quite different scales, so the two graphs show more clearly using two different y axes.
At this point the graph is complete, so you can click done and then the back to dashboard button up the top right of the page.
Return to editing the Report tile by clicking the edit this dashboard button at the top right, and then the edit tile button to the top right of the tile itself.
Click into the legend configuration section and click on show legend to tick the box.
Click done.